manualshive.com logo in svg

KAESER KOMPRESSOREN M43, Service Manual, Page: 57 / 246

Share
Download
KAESER KOMPRESSOREN M43 Service Manual Download Page 57

6.3.3.3 Option sd

Changing a fixed height towbar from eye to ball coupling

Fig. 14 Change from eye to ball coupling (fixed height towbar)

1

Towing eye

2

Screw

3

Sleeve

4

Self-locking nut

5

Ball coupling

6

Towbar tube

➤ Check that the ball coupling to be fitted is complete.
➤ Proceed as illustrated.

Removing the towing eye
1. Loosen and remove both nuts 

4

.

2. Remove both bolts 

2

.

3. Pull off the towing eye 

1

.

4. Secure sleeve 

3

.

Fitting the ball coupling

Precondition The towing eye has been removed.

The assembly condition as shown in the centre graphic in 14 has been achieved.
The complete ball coupling is to hand.

1. Position sleeve 

3

 on the corresponding hole within the towbar 

6

.

6

Installation

6.3

Adjusting the chassis

No.: 9_9432 02 E

Service Manual    Screw Compressor  
M43  

47

RAMIRENT

All manuals and user guides at all-guides.com

Summary of Contents for M43























































































































































































































































Reviews:

No comments