![background image](http://html1.mh-extra.com/html/kaeser-kompressoren/hbpi-pr/hbpi-pr_installation-and-operating-manual_3172311053.webp)
6.6 Installing the inlet silencer
Weight of the inlet silencer: max 661 lb.
Material Inlet silencer, lifting gear, torque wrench
Fig. 25 Installing the inlet silencer
1.
Rotating rotors.
Danger of squashing or severing, especially of extremities.
➤ Do not reach into the interior of the block.
2. Remove the cover from the flange connection of the blower block.
3. Attach the lifting sling at the eyelets of the inlet silencer and lift, using appropriate lifting gear.
4. Align the inlet silencer in parallel with the outlet silencer and lower carefully.
5. Install the inlet silencer at the flange of the blower block.
Tightening torque 133 lb-ft.
6.7 Installing accessories at the T-piece
Material T-piece, valve support including safety relief valves, compensator, unloaded start valve, torque
wrench
Fig. 26 Installing the T-piece
1
Valve support including safety relief valves
2
T-piece
3
Compensator
4
Unloaded start valve (Option C11)
5
Outlet silencer
1. Remove the cover from the flange connection of the outlet silencer.
6
Installation
6.6
Installing the inlet silencer
Number: 9_9572 28 USE
Installation and Operating Manual Rotary lobe blower
HBPI pr
43