KAESER KOMPRESSOREN CSD 82, Service Manual

Page: 55 / 126

Maintenance
10 --- 47
Maintenance work may only be carried out:
by persons trained in the machine and persons under the supervi-
sion of an expert,
by experts,
by an authorised KAESER service agent.
Work on electrical devices may only be carried out in accordance with elec-
trical regulations:
by persons trained in the machine under the supervision of an
electrician,
by an electrician,
by an authorised KAESER service agent.
10.2 Maintenance Schedule
Maintenance intervals are recommendations only and should be adjusted
to suit the installation and operating conditions.
According to the way a machine is equipped, sensors and/or maintenance interval
counters monitor the operational state of important functional devices. Necessary mainten-
ance tasks are signalled by the SIGMA controller.
Keep a log of all service work.
This enables the frequency of individual maintenance tasks to be compared with
KAESER’s recommendations. A list is given in chapter 10.15.
10.2.1 Resetting maintenance interval counters
Maintenance interval counters indicate the operating hours between maintenance tasks.
When a maintenance task is completed, reset the corresponding counter to its original
value.
See the SIGMA CONTROL service manual.
Pre --- condition: Maintenance task completed.
Service message reset.
Activate password level 4.
Select the appropriate entry from the maintenance menu.
Select ’reset’ and ’y’ and confirm with the enter key.