KAESER KOMPRESSOREN CSD 82, Service Manual

Page: 30 / 126

Installation and Operating Conditions
5 --- 22
5 Installation and Operating Conditions
5.1 Ambient Conditions
There must be no open flames or sparks at the place of installation.
Any welding work carried out on the equipment must not cause a fire hazard through
flying sparks or excessive temperature.
The machine is not explosion ---proof.
Do not operate in areas in which specific requirements with regard to explosion
protection are applied.
For instance, the requirements of 94/9/EU (ATEX directive) for correct use in explosion
hazardous areas.
Clean inlet air with no damaging contaminants.
Inlet air free of explosive or chemically unstable gas or vapour.
Ambient temperature must be acceptable and stable.
The airend discharge temperature must remain constant to prevent the build ---up of
condensate.
Suitable fire extinguishing material must be to hand.
5.2 Installation Conditions
5.2.1 Place of installation and space required
The floor must be level, firm and able to bear the weight of the equipment.
If installed outdoors, the equipment must be protected from frost, direct sunlight, dust
and rain.