Operating Manual
| Cable And Network Analyzer System (iOS Version)
48
• Geotag service providers can gather geo data from several sources. Having more data sources turned on and
shared with your geotag service provider can improve your chances of an adequate fix. These include GPS (Global
Positioning System) switched on and set to share your location (if fitted), Wi-Fi access points that can be received
nearby, Cellular Phone tower signals being received nearby for smartphones or cellular enabled tablets, and an
internet data connection can all assist to get a geotag fix.
•
If your user device Wi-Fi is your only Geotag data collection source, get your geotag fix first then use the Wi-Fi to
connect to an internet connection.
•
You can use your map application on your user device to confirm you have a Geotag fix for your location this can
help isolate problems with your Geotag fix.
Unable to Measure Cable Loss
• Cable loss measurement uncertainty increases as cable loss increases, if you suspect very high cable loss. The
reflected signal from the cable end may become too low to measure. Check the terminated return loss of your
cable, if the connectors or assembles at the start of cable are very poor. This can create a reflected signal stronger
than the cable loss measurement signal. Attend to any local return loss problems first, before attempting your cable
loss measurements.
