Operating Manual
| Cable And Network Analyzer System (iOS Version)
30
1.19.2.9 1.19.2.9 Trace Hold Menu
Figure 22 Trace Hold (Max-Min Menu)
1.19.2.9.1 Trace Hold Max
Holds the maximum trace value accumulated over time.
1.19.2.9.2 Trace Hold Min
Holds the minimum trace value accumulated over time.
1.20 Stimulus Mode
This mode allows the iVA to be used as a signal source. The output power is Typically 0dBm. A sequence of
frequencies and time on periods can be programmed and is repeated continuously while Tx is active. If only
one frequency step is programmed a continuous signal is produced when 1.20.1.3 run is pressed. All steps are
repeated in a loop while run is pressed.
Figure 23 Stimulus Mode
