21
© 2017 Infinite Electronics, Inc., All Rights Reserved.
1.13.2 Subplots
Figure 11 Subplot Display
8. Record menu, take photo, choose photo, record selected trace.
9. Record Icon
10. State Menu. See Section 1.23
11. Subplots. See Section 1.13.2
1.13.2.1 First Subplot
Note :
The subplot has 2 traces, the Y Axis is red as Tr4 is highlighted. If Tr1 was highlighted the Y axis would be green.
1.13.2.2 Second Subplot
1.13.2.3 Third Subplot
Note :
When subplots and traces are added to reports, they are all added as individual Traces to the report.
Subplots determine how traces are displayed in a given channel. Having 1 subplot will cause the whole trace screen to be
used and all traces in that channel to be displayed on top of each other. Having the same number of subplots as traces,
will cause the trace display to be divided horizontally for each trace. If you have more traces than subplots, the traces
will be distributed evenly between subplots, these are added in trace order. As an example, if you have 4 traces and 2
subplots , trace 1 will be on subplot 1 , trace 2 will be on subplot 2, trace 3 will be back to subplot 1 and added there, trace
4 added to subplot 2.
If you have more subplots configured than you have traces, then the number of subplots displayed will be the same as the
number of traces. If you want some traces to appear on the same subplot, use the preceding info to plan how you allocate
each trace number. There is a maximum of 4 traces on each channel display.
1.13.2.1
1.13.2.2
1.13.2.3
TR4Highlighted
