Country-
spec. Set-
tings
Level Display/
settings
Action in this menu/meaning
4
1
2
3
4
Active curve
1 - 5
F
Select the active curve.
NOTE: Up to 5 characteristic curves can be configured inde-
pendently and one of them can be activated for regulation
each time.
4
1
2
3
4
Number of nodes
2 – 5
F
Specify the number of nodes.
Power
0,0 – 100,0 [% Pref] /
100 [% Pref] / 1
F
Specify power for 1st, 5th ... Node as a percentage of the maximum
power.
Voltage
80,0 – 125,0
[%Unom] / 112 /
0.1
Password protect
Status
1. Specify voltage for 1st, 5th ... node as a percentage of the maximum
voltage.
2. Activate optional password protection .
3. Confirm the action field.
4
1
2
3
4
Power Rampup
Power rampup gradi-
ent
NOTE: Power ramp-up is used to ramp up the power gradu-
ally. More detailed information at
4
1
2
3
4
Gradient
1 – 600 [% / min] /
10 [% / min] / 1
F
Set increase.
4
1
2
3
4
Rampup on every con-
nect
Rampup on first con-
nect
Rampup after grid fail-
ure
Status
1. Activate option.
2. Activate optional password protection.
3. Confirm action field.
4
1
2
3
4
Features / Functions
NOTE: Input screens for advanced device functions
4
1
2
3
4
System Control
NOTE: Displays the values transmitted by a connected EMS.
However, controls the unit even without an EMS.
NOTE: Default values are active after every device restart.
4
1
2
3
4
Control mode
EMS / Lokal EMS /
Active
NOTE: Changes only affect the selected mode.
F
Select
EMS
or
Lokal
mode.
Node:
In
EMS
EMS mode, the values for
Lokal
mode are read-only. In
mode
Local
he values for the
Lokal
mode to be changed by service
and installer.
Button: Update
1 – 10 [sec] 1 [sec]
Repeat: Active
F
Displayed values: :
-
cyclical
: every second (default setting) or
-
manuel
via the update button.
9 | Configuration and operation
Manual
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137 TL3-S
Page 58
EN-US
