3.2.2
Interfaces
You can configure the interfaces and the web server in the Settings menu. The device has the following inter-
faces for communication and remote monitoring.
Ethernet interface
Communication with the EMS/PMS is carried out via the Ethernet interface.
The local web server can be used to configure the device and perform updates.
USB interface
The device's USB connection is a type A socket. It is located on the communication circuit board. The USB con-
nection is specified to draw 500 mA of power.
Use the USB interface to read out stored operating data, load firmware updates or device configurations using
a FAT32-formatted USB stick (max. 4GB).
A connection to the unit's internal web server can be established via a plugged-in USB WiFi stick. In addition to
commissioning, service information and firmware updates, more extensive configurations are also possible via
the web interface.
3 | Device description
Manual
blueplanet gridsave 92.0 TL3-S blueplanet gridsave 110 TL3-S blueplanet gridsave 137 TL3-S
Page 10
EN-US
