Kaba Mas Unicon CL Series, Operating Instructions Manual

Page: 11 / 16

11
2. Enter the combination (User ID + PIN) of the user for which the PIN is to be
changed.
G R
Note: The default PIN for a Manager User is “55255”. For security puposes, the
Master User PIN should not ever be changed back to the default PIN of
“12345”.
3. Enter the new combination (User ID + PIN) for the user.
G R
4. Enter the new combination (User ID + PIN) for the user again for verification.
G R G R
5. Record the new PIN and store it in a secure place.
Unlock with Master/Manager Combination
1. Press
Y
.
2. Enter valid Master or Manager combination.
G
, long
G
3. Turn the lock knob clockwise (CW) to the “unlocked” position and open the
door.
Note: A “lock open” audit record is written at this point.
Lock with Master/Manager Combination
1. Close door and turn the lock knob counterclockwise (CCW) to the “locked” position.
2. Press
Y
.
3. Enter a valid Master or Manager combination.
G
, long
G
, long
R
Note:
A “combination locked state” audit record is written at this point followed by a “lock
close” audit record if the knob is in the “locked” position. If the knob is not fully
turned CCW to the “locked” position, the long red light
R
will not display at the end
of the operation and the “lock close” record will not be written.
Shelve Lock using Master User Combination
To remove a lock from an operational mode, you can “shelve” the lock. This opera-
tion places the lock in
Shelved Mode where most lock information is returned to the
factory default settings. The only information retained from the operational mode is
the audit information. If the Super Master is active, it is also unaffected.
1. Press #
Y
and then 3 .
G R
2. Enter the Master User combination.
G R
3. Enter 5 .
G R
4. Enter 5 again for verification.
G G G R G R
The lock will now open by entering any of the default factory combinations for the
lock. (For
User ID 111 the default PIN is “ 12345 ”. For all other Users IDs the default
PIN is “ 55255 ”. The default Lock User access combination is “5525 “. ) You should
test the lock by locking and unlocking the lock with one of these combinations.