K+H O 500 C, Installation And Operation Manual

Page: 29 / 37

Page 29
4.2.2 Midi-Commands
This paragraph explains the structure of
commands, which is controlling the individual
functions of the digital controller and recalls
adjustents or setup-menus. As an external
controller any IBM-compatible PC may be used,
which is copnnected to the O 500 C via the
adaptocable, as described in Fig. 4.2/5.
For the data-transfer a separate, small DOS-
programme „BIN2SYX“ will be needed, which
can be supplied free of Charge by KLEIN +
HUMEL.
This programme is copied into a menu of the
HDD in the PC and when copied it is recalled by
typing in:
C:\bin2syx p x 2 9600 XXX Y
The syntax of this command is described more
detailed in Fig. 4.2/6, which als contains the
possible control-functions of the system.
Examples:
The O 500 C is connected to the COM2 port of
a PCs and the bin2syx software has been copied
into file C:\
1. Recall setup 004:
Type in:
c:\bin2syx p x 2 9600 64 4
2. Adjust the Input Gain setting to -10 dB :
Type in:
c:\bin2syx p x 2 9600 65 118
3. Adjust „Power Amp -10 dB“ :
Type in:
c:\bin2syx p x 2 9600 129 1
Fig. 4.2/6: Listing of the individual commands for
the O 500 C
Syntax:
BIN2SYX p x 1 9600 XX Y
1 = Int: 1=COM1; 2=COM2
9600 = Baud Rate
XX = No. Of Command (taken from table)
Y = Value (as taken from table)
No. Of Command Name / Function Value
64 Load Setup 0 = Setup 000 ... 14 = Setup 014
65 Input Gain 0 = -128 ... 128 = 0
66
67
Channel Gain Sub 0 = -18 dB ... 48 = +6 dB [Inc. 1 = 0.5 dB)
68 Channel Gain Low --- " ---
69 Channel Gain Mid --- " ---
70 Channel Gain High --- " ---
71
72
73
74
75
76
77
Channel Delay Sub t[ms] =
Y
* 0.3628
78 Channel Delay Low --- " ---
79 Channel Delay Mid --- " ---
80 Channel Delay High --- " ---
81
82
83
84
85
86
87
Phase Invert Sub 0 = no, 1 = yes
88 Phase Invert Low --- " ---
89 Phase Invert Mid --- " ---
90 Phase Invert High --- " ---
91
92
93
94
95
96
97
Channel Mute Sub 0 = no, 1 = yes
98 Channel Mute Low --- " ---
99 Channel Mute Mid --- " ---
100 Channel Mute High --- " ---
101
102
103
104
105
106
Input Select 0 = Analog, 1 = Digital
107 Master Delay t[ms] = Y * 0.3628
108
109
110
111
Limiter Release 0 = 10 dB/s ... 240 = 250 dB/s
112
113
114
Mute Attenuation 0 = +40 dB ... 40 = 0 dB
115 Mute 0 = off, 1 = on
116 Delay Link 0 = off, 1 = Mid + Hi, 2 = Mid + Hi + Low
117
118
119
Top (= Line) 0 = Z1, 1 = Z2, 2 = Z3 ...
120 Subwoofer (= Column) 0 = S1, 1 = S2, 2 = S3 ...
121 Gain Offset Analog 0 = -30 dB ... 60 = +30 dB
122 Gain Offset Digital 0 = -30 dB ... 60 = +30 dB
123 Logo 0 = off, 1 = on
124
125
Input Routing 0 = Left, 1 = Right, 2 = Left + Right
O 500C MIDI Commands