Page 14
Fig. 2.1/3: Fixing holes for mounting LH 35 bracket
2.2 Connectors and Wiring
2.2.1 The connectors on the rear panel
All connectors of the O 500 C are located on
the rear panel, placed in two areas. When
installing the monitor under narrow or tight
conditions, care must be taken for the cables
and their minimal bending radius.
Mains connector, Mains switch,
Groundlift
Fig. 2.2/1 shows the connectors which are
located on the lower part of the monitor.
The connection between the O 500 C and the
mains is made by a standard socket, which also
includes the mains fuse.
Above the power socket is the mains switch with
a built-in controllamp.
The groundlift switch is provided to separate the
Fig. 2.2/1: The connectors at the lower part of
the rearpanel
CAUTION!
To prevent the risk of fire and shock hazard don´t expose
this appliance to moisture and rain.
Do not remove rear panel.
Refer to qualified service personnel for service.
No user serviceable parts inside.
SB 6,3 A
T 3,15 A
CAUTION!
Replace fuse only with same type and rating
GROUND
CONNECTED LIFTED
POWER
AC 50 - 60 Hz Max. power consumption 1500 VA
MAINS
AC 117 V~
AC 230 V~
Groundlift-Switch
Mains Switch with
Power-ON Lamp
Fuse SB 6,3 A
Attention!
Replace only with same Type and Rating!
Fuse Holder
Mains Socked
Adhesive Label with
Serial No.