Page 13
on the tilting adaptor LH36, which is fixed to the
bottom of the cabinet. When adding the TV-
adaptor LH29 or the tripod stand adaptor LH28,
the monitor can be mounted on a speaker stand.
Alternatively it is possible to use the U-shaped
mounting bracket LH 35, which has its threaded
holes on the side of the cabinet. Here, too, it is
possible to add the LH 29 and LH 28 for mounting
the monitor on a speaker stand. With the LH 35
mounting bracket it is also possible to have the
O 500 C mounted from the ceiling ( may need
additional adaptors, depending on the
construction ).
Horizontal operation
In some cases a vertical operation of the
monitors may not be possible, due to lack of
space or for architectural reasons. For this case
K+H offers a special version for horizontal
operation ( please specify for horn LEFT / horn
RIGHT ) where the horn is rotated by 90
degrees, and special heatsinks are provided to
follow this type of operation. This way the heat
dissipation from the power amps is maintained
optimized. Monitors in this version have to be
ordered specially at the factory, a local
conversion is not possible.
Flush mount into a wall
The O 500 C can also be flush mounted into a
wall or other areas where limited or no airflow
can be provided. For these cases K+H offers a
special wall-mount adaptor kit, which will
accomodate the O 500 C electronics and an
extension cable for the speaker connectors. Now
the electronics can be mounted in an area with
better air circulation. The O 500 C can be ordered
with this option at the factory, but it is also
possible to make a local change after installation
with the wall mount kit.
Fig. 2.1/2: Mounting of the tilting adaptor LH36
