9
2�2 Installing the Module
1. Turn off the PXI system/chassis and disconnect the power cable from the power
source.
2. Align the module edge with the module guide in the PXI chassis.
3. Slide the module into the chassis until resistance is felt from the PXI connector.
4. Push the ejector upwards and firmly seat the module into the chassis.
5. Once the module is fully seated, a “click” can be heard from the ejector latch.
6. Tighten the screw on the front panel.
7. Connect the power plug to a power source and turn on the PXI system/chassis.
