Copyright © 2011 JVL Labs All Rights Reserved
22
17.
servIce lIGhTs pcb replacemenT
1. Turn off the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Disconnect the Service Lights cable connector from the Service Lights PCB (see Fig. 51 on page
56 for details).
5. Unscrew two Machine Screws #4–40 x 3/16” and replace the old PCB with the new one
(see Fig. 52 on page 56 for details).
6. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
Service lights PCB replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
