Copyright © 2011 JVL Labs All Rights Reserved
20
15.
power sUpply replacemenT
NOTE: You will need a short Philips head screwdriver.
1. Turn off the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Unscrew two Machine Screws #8-32 x 3/8 ”, and move the Coin Out Tray out of the way by push-
ing it to the left (see Fig. 43 on page 51 for details).
5. Unscrew three Machine Screws #8–32 x 1/4 ” (see Fig. 44 on page 56 for details).
6. Tilt and position the Power Supply Assembly as shown in Fig. 45 on page 53 to remove it from
the countertop. Disconnect AC and DC cables from the old Power Supply Board.
7. Unscrew 4 Machine Screws #6-32 x 3/8” (see Fig. 46 on page 53 for details)
8. Replace the old Power Supply with the new one.
9. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
Power supply replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
