Copyright © 2011 JVL Labs All Rights Reserved
Flash memory card replacement
6
2.
flash memory carD replacemenT
1. Turn off the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Unscrew 4 Machine Screws:
(Two- #8-32 x 1-1/4” and two #8-32 x 3/8”) and open the monitor to gain access to all electronic
components (see Fig. 3 on page 28 and Fig. 4 on page 29 for details).
5. Press on the snaps of the Inner Cover to unlock them. Tilt the cover towards you, and then slide
the Inner Cover upwards. Move it along the Monitor Stopper Cable and set it aside (see Fig. 5 on
page 30 for details).
6. Unscrew one Hex Nut #8-32. Lift the Inner Box to release the latches then tilt the top of the box
towards you to gain access to the SD Memory card slot (see Fig. 6 on page 30 and Fig. 7 on page
31 for details).
7. Press onto the existing SD Memory card to eject it from its socket. Replace it with the new one
(see Fig. 7 on page 31 for details).
8. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
