Copyright © 2011 JVL Labs All Rights Reserved
Safety information
3
safeTy InformaTIon
1. Read Instructions
: Read instructions before proceeding with the installation and operation of
the product.
2. Heed Warnings
: Follow all warnings on the product and in the operating instructions.
3. Overloading
: Do not overload wall outlets or extension cords. This can result in fire or electric
shock.
4. Object and Liquid Entry
: Never push foreign objects into this product through openings as
they may touch dangerous voltage points that could result in a fire or electric shock.
5. Servicing
: It is dangerous to service this product yourself. Refer to qualified service personnel.
6. Replacement Parts
: When replacement parts are required, use only replacement parts speci-
fied by the manufacturer.
7. Safety Check
: Upon completion of any service or repairs to this product, ask the service techni-
cian to perform safety checks to determine that the product is in proper operating condition.
Additional Safety Information for the User
Verify Line Voltage Before Use
: Your JVL machine has been designed for use with 115/230V
60/50Hz AC current. Connection to another line voltage can create a safety hazard.
If you have any questions about the voltage requirements, contact your local distributor.
WARNING:
To prevent fire or shock hazard, do not expose this appliance to rain or moisture. It has been de-
signed for indoor operation only.
The appliance is not suitable for installation in an area where a water jet would be used. The appli-
ance must not be cleaned by a water jet.
If the supply cord is damaged, it must be replaced by a special cord available from the manufac-
turer or its service agent, or the same type as the original.
Changes or modifications not expressly approved by JVL Labs could void the user’s authority to
operate the equipment.
NOTE
:
This equipment has been tested and found to comply with the limits for a Class A digital de-
vice, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own
expense.
If you require any assistance, please contact Technical Support at 1-800-296-6657.
The information in this manual is subject to change without notice. JVL and JVL logo are registered trademarks of JVL Labs.
Product names mentioned herein are for identification purposes only and may be trademarks and/or registered trade-
marks of their respective companies. © 2008 JVL Labs. All rights reserved.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
