Copyright © 2011 JVL Labs All Rights Reserved
15
10.
coUnTer replacemenT
1. Turn off the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Unscrew 4 Machine Screws:
(Two- #8-32 x 1-1/4” and two #8-32 x 3/8”) and open the monitor to gain access to all electronic
components (see Fig. 3 on page 28 and Fig. 4 on page 29 for details).
5. Press on the snaps of the Inner Cover to unlock them. Tilt the cover towards you, and then slide
the Inner Cover upwards. Move it along the Monitor Stopper Cable and set it aside (see Fig. 5 on
page 30 for details).
6. Disconnect the Counter Cable connector (6) from the I/O Board (see Fig. 30 on page 44 for
details).
7. Unscrew two Machine Screws #4-40 x 3/16” and lift the I/O Board upwards to remove the Coun-
ter Cable, located underneath the board (see Fig. 31 on page 45 for details)
8. Unscrew one Machine Screw M3 x 6 and replace the old counter with the new one (see Fig. 33
on page 46 for details).
9. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
Counter replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
