Copyright © 2011 JVL Labs All Rights Reserved
11
7.
monITor UnIT replacemenT
1. Turn off the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Unscrew 4 Machine Screws:
(Two- #8-32 x 1-1/4” and two #8-32 x 3/8”) and open the monitor to gain access to all electronic
components (see Fig. 3 on page 28 and Fig. 4 on page 29 for details).
5. Press on the snaps of the Inner Cover to unlock them. Tilt the cover towards you, and then slide
the Inner Cover upwards. Move it along the Monitor Stopper Cable and set it aside (see Fig. 5 on
page 30 for details).
6. Unplug the following connectors from the CPU Box:
• LVDS cable
• Touch screen cable
See Fig. 20 on page 39 for details
7. Unscrew one Hex Nut #8-32 and free the Touch Screen USB cable from the clamp (see Fig. 21 on
page 39 for details).
8. Disconnect the Monitor Door Stopper Cable from the Monitor by unscrewing one machine
screw #8-32 x 3/8” (see Fig. 22 on page 40 for details).
Attention, the Monitor Assembly has to be secured at this moment, as it will fall if not properly
handled.
9. Remove the Monitor assembly by lifting upwards. Replace with the new one.
10. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
(6) HNS-CT09-780
(3) HNS-CT09-716
Monitor unit replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
