Copyright © 2011 JVL Labs All Rights Reserved
10
6.
coIn sensor replacemenT
1. Turn off the countertop and disconnect the AC power supply.
2. Open the lock and tilt the top of the Back Door towards you to remove it completely (see Fig. 1
on page 26 for details).
3. Remove the freely installed Cashbox by lifting upwards, then pulling it towards you (see Fig. 2
on page 27 for details).
4. Lift the Coin Acceptor Lock upwards and tilt the Coin Acceptor towards you (see Fig. 15 on page
36 for details).
5. Unplug the Coin Acceptor (if electronically controlled) and remove it from the countertop
(see Fig. 16 on page 36 for details).
6. Unplug the Coin Sensor connector (see Fig. 17 on page 37 for details).
7. Unscrew two machine screws #8-32 x 1/4”. Remove the Coin Acceptor Bracket from the ma-
chine (see Fig. 18 on page 38 for details).
8. Unscrew two machine screws #4-40 x 1/4” and replace the old JVL Sensor PCB with the new one
(see Fig. 44 on page 52 for details).
9. Reassemble the countertop by following the previous steps in reverse order.
NOTE: For part numbers see Appendix B
Coin sensor replacement
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
