JVC XV-BP10J Service Manual Download

Page: 37 / 85

TRAINING MASTER FOR BLU-RAY (BD)

Why does it take so

long to load my BDs?

The loading times for a blu-ray disc is 30 seconds.

When a customer switches from one disc to another, the lens

will change which is what causes the delay.

Blu Ray require different lasers to read the discs.

6. BLU-RAY PLAYER

6-1. Slow Loading Times for BDs

Why does it take

so long to boot my BD?

The booting times for the BD is 20 seconds.

When the set is booted, it takes a little long time

to loading the OS program.

6-2. Booting Times

6-3. Firmware Update Availability

Is there a firmware update

available for the BD320?

Yes, firmware updates are available at JVC website

that address some playback issues with movies.

The BD320 firmware updates are available there.

Advise the customer to download the firmware and unzip the file.

And the file should be copied into USB or Disc.

Also, firmware updates are done by USB or Disc.

3-26

Summary of Contents for XV-BP10J






















































































Search results

Summary of Contents for XV-BP10J

Reviews:

Related manuals for XV-BP10J

Brands by name

Popular brands

JVC XV-BP10J, Service Manual

Search results

Summary of Contents for XV-BP10J

Reviews:

Related manuals for XV-BP10J

Brands by name

Popular brands