JVC XV-BP10J, Service Manual

Page: 38 / 85

1-1-3. Service hint (Any picture / Remark)
COMPONENT REPAIR GUIDE
1. NO BOOTING WHEN YOU TURN THE UNIT ON
When you turn on your BD-P, it will display “Hello” message continuously on front
panel, and it will not boot-up normally.
1-1. IC706
1-1-1. Solution
Replace IC706 on main board.
1-1-2. How to troubleshoot (Countermeasure)
1) Please check 1.2V of C778.
2) If 1.2V voltage doesn’t come out, check IC706 Pin7(P_CON_5.3V).
--> If you figure out those power control doesn’t come out any signal level (or voltage),
please replace IC501 of main board.
3) If P_CON_5.3V comes out 5V signal,
first, check the C704,R710, R705 and then replace IC706.
4) After changing it, if the set is still not booting, check MPEG IC(IC101).
< Main board top view >
C704
R710
IC706
C778
R705
IC101
IC105
3-27