93
Camera
(Camera Properties) (continued)
Video
Video Properties
Configure Video
Properties
^
Click to display the [Video Properties] screen.
Make detailed display settings for the selected camera.
Note:
●
The displayed items and initial settings differ
depending on the camera. For details, see the
instruction manual of the camera.
Preview
^
For displaying the preview.
Audio
Audio
selection
Default
microphone
^
This setting is applicable when microphones and/or a
speaker are used. Available microphones/speakers
vary depending on the camera.
Default speaker
^
Recording
Properties
Recording
Recording
settings
Always
Never
Conditionally
Always: Select this check box to always record images.
Never: For recording images manually without
recording settings.
Conditionally: For setting the conditions to record
images.
●
Default value varies depending on the camera.
●
Configure settings below when you select
[Conditionally].
Built-in motion
detection
Select check box
䢇
Do not select
check box
Select this check box to record all images where any
motion is detected.
Event
Select check box
䢇
Do not select
check box
Select this check box to start recording at the
occurrence of an event.
●
If the [Event] check box is selected, set the start
event and stop event.
Start event
^
Stop event
Configure
Events
Hardware input
events
Manual events
Generic events
䢇
^
Select an event and click [Open] to display the settings
screen for the selected event.
Enable pre-
recording
Select check box
䢇
Do not select
check box
Images before/after the occurrence of motion or an
event can be recorded. You can specify units of
seconds to record before/after the occurrence.
●
Default value varies depending on the camera.
second(s)
^
Enable post-
recording
Select check box
䢇
Do not select
check box
second(s)
^
Item
Preset Values
Description
