JVC VR-X1600U Instructions Manual Download Page 91

Page: 91 / 204

This section describes procedures to set a password used to
start this unit.

Setting the Password

Set the password to log in to this unit.

Caution:

●

The warning message (

Page 193) will not be displayed

unless you login after startup of this unit. In this case, the
[WARNING] indicator lights up.

Note:

●

Password is not set by default. If you do not want to use a

password for login, this setting is not necessary.

Click the [Start] button on the desktop, followed

by clicking [Control Panel]

The control panel opens up.

Click [Add or remove a User Account]

The account selection screen appears.

Click [Administrator]

The account modification screen appears.

Click [Create a password]

Setting the Password to
Login to This Unit

Summary of Contents for VR-X1600U













































































































































































































Search results

Summary of Contents for VR-X1600U

Reviews:

Brands by name

Popular brands

JVC VR-X1600U, Instructions Manual

Search results

Summary of Contents for VR-X1600U

Reviews:

Brands by name

Popular brands