63
䢇
When a manual event occurs
1
Click [+] in [Advanced Configuration]
2
Click [+] in [Events and Output]
3
Click [+] in [Manual Events]
4
Double-click any event name you want to set
The [Manual Event Properties] window property appears.
5
Select the [Send e-mail if this event occurs]
check box
●
To attach images to notification mails, select the
[Attach image from camera] and select an image
source.
You can use more than one NVR to build a large-scale
system with a large number of cameras. In this case, one
NVR is used as a master and other NVRs are registered with
the master NVR as slaves.
●
Up to seven Slave NVR can be registered for a single
Master NVR.
●
Up to 128 cameras can be controlled by a single master/
slave system.
A
Master NVR
B
Switching hub (LAN1 of the master NVR)
C
Switching hub (LAN2 of the master NVR/LAN2 of the
slave NVR)
D
Slave NVR
E
Switching hub (LAN1 of the slave NVR)
Caution:
●
If you set this unit as a slave, connect only one master
NVR. Connecting more than one master NVR may cause
this unit to malfunction.
●
The version of all NVR units in a master/slave system
must be set the same.
●
The NVR unit operating as the master server cannot be
used as a slave server for another NVR unit.
●
When operating as the master server, the recording
display performance may drop.
Note:
●
VR-X3200U and VR-X1600U may be mixed in a master/
slave system.
●
If you change the identity (host name) of an NVR within
the network, each NVR will become easier to identify.
Select [Advanced Configuration], [Server Access], [Server
name] in this order to specify the host name.
Using More Than One NVR
