JVC VR-X1600U, Instructions Manual

Page: 131 / 204

125
䡵
A list of statuses that can be obtained from this unit
OID: iso(1) - org(3) - dod(6) - internet(1) - private(4) - enterprises(1) - jvc(718) - nvr(916) - nvrObjects(1)
䡵
A list of TRAPs supported by this unit
OID: iso(1) - org(3) - dod(6) - internet(1) - private(4) - enterprises(1) - jvc(718) - nvr(916) - nvrTraps(2)
Group Identifier Name SYNTAX MAX-
ACCESS
UNITS Description
Current
value nvrStausGroup
(1)
1 nvrRecStatus
INTEGER {
off(0),
on(1)
}
read-only - REC status
4 nvrCpuUsage INTEGER(0..100) read-only %
CPU usage
5 nvrDdriveWrite
INTEGER(0..
4294967295)
read-only
Byte/
Sec Writing rate of D
drive
6 nvrRunViewer
INTEGER {
stop(0),
run(1)
}
read-only -
Smart Client
executed status
Warning list
nvrWarningGroup
(2)
1 nvrWarningTable
SEQUENCE OF
NvrWarningEntry not-
accessible
-
Table of last 10
warnings
1.1 nvrWarningEntry
NvrWarningEntry
INDEX {
nvrWarningIndex
}
not-
accessible
-
Table of last 10
warning entries
1.1.1 nvrWarningIndex INTEGER(1..10) read-only - Warning list index
1.1.2 nvrWarningDate DateAndTime read-only -
Warning date and
time
1.1.3 nvrWarningInfo DisplayString read-only
-
Warning
information
Camera
List nvrCameraGroup
(3)
1 nvrRegistCameraTable
SEQUENCE OF
NvrRegistCameraEntry not-
accessible
-
Table of 32
connected
cameras
1.1 nvrRegistCameraEntry
NvrRegistCameraEntry
INDEX {
nvrRegCamIndex
}
not-
accessible
-
Table of 32
connected
camera entries
1.1.1 nvrRegCamIndex INTEGER(1..64) read-only -
Connected
camera list index
1.1.2 nvrRegCamIpAddress IpAddress read-only -
Connected
camera IP
address
1.1.3 nvrRegCamName DisplayString read-only -
Camera Name
1.1.4 nvrRegCamConnection
INTEGER {
disconnect(0),
connect(1)
}
read-only -
Camera
connection status
Identifier Name
OBJECTS STATUS
Description
1 nvrRecStatusChange nvrRecStatus current REC status change notification
3 nvrNotifyWarning
nvrWarningIndex,
nvrWarningDate,
nvrWarningInfo
current Warning occurrence notification
4 nvrNotifyCamConnect
nvrRegCamIndex,
nvrRegCamIpAddress,
nvrRegCamName,
nvrRegCamConnection
current
Camera connection status
change notification