4
English
CAUTION: Make all connections before plugging the System into an AC power outlet.
For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the Unit.
Open each of the terminals and insert the speaker wires firmly, then close the terminals.
Note:
Connect the red (+) and black (–) wires of the right side speaker to the red (+) and black (–) terminals marked R on the Unit.
Connect the red (+) and black (–) wires of the left side speaker to the red (+) and black (–) terminals marked L on the Unit.
Speaker put on the right (rear side)
Speaker put on the left (rear side)
CAUTION: The TV may display irregular colors if you place the speakers too close to it, though the speak-
ers are magnetically shielded. If this happens, place the speakers further away from the TV.
Connecting Audio Equipment ——————————————————————————
Connect signal cords (not supplied) between the System’s LINE IN (AUX)/LINE OUT terminals and the output/input terminals of the external
MD recorder, tape deck, etc.
You can now listen to the external source through the System, or record the System’s CD player, cassette tape, or tuner to an external unit.
Connecting a TV —————————————————————————————————
Connect the video cord (supplied) between the System’s VIDEO OUT terminal and the video input jack of your TV. When you want to listen to
the music on your TV, connect the signal cord (not supplied) between the System’s LINE OUT terminals and the audio input jacks of your TV.
Connecting the Speakers
Connecting External Equipment
L
R
SPEAKERS
IMPEDANCE
MIN 4
Ω
Black
LINE OUT
LINE IN
(AUX)
R
L
Signal cord (not supplied)
MD recorder or tape deck (not supplied)
Pin-plug x 2
Pin-plug x 2
Pin-plug x 2
Pin-plug x 2
Signal cord (not supplied)
LINE OUT
LINE IN
(AUX)
VIDEO OUT
R
L
Signal cord (not supplied)
Video cord (supplied)
Pin-plug x 2
Pin-plug x 2
TV
UX-V6V(U)-eng.fm Page 4 Thursday, August 5, 1999 2:59 PM
