2
English
■
■
Getting Started
As you unpack your new System, please check to make sure that along with the System the following items are included:
Power Cord (1)
AM/SW Loop Antenna (1)
FM/SW Wire Antenna (1)
Video Cord (1)
Remote Control (1)
Batteries (2)
AC Plug Adaptor (except for Hong Kong) (1)
If any of these items is missing, contact your dealer immediately.
To avoid damaging the System, set the voltage before plugging in the System.
Set the correct voltage for your area with the VOLTAGE SELECTOR switch on the back of the Unit. Use a screwdriver to rotate the selector
so the number the arrow is pointed at is the same as the voltage.
Load the batteries as indicated in the illustration, making sure that they are positioned correctly (+ with + and – with –).
R6P(SUM-3)/AA(15F)
CAUTION: To avoid battery leakage or explosion:
•
Remove batteries when the Remote Control will not be used for a long time.
•
When you need to replace the batteries, replace both batteries. Do not use an old battery with a new one.
•
Do not use different types of batteries together.
The Remote Control makes it easy to use many of the functions of the System from a distance of up to 7m (23 feet) away.
You need to point the Remote Control at the remote sensor on the System’s front panel.
Accessories
Set the VOLTAGE SELECTOR Switch
Putting Batteries in the Remote Control
Using the Remote Control
UX-V6V
Remote sensor
UX-V6V(U)-eng.fm Page 2 Thursday, August 5, 1999 2:59 PM
