21
English
■
5. Setting the volume level.
1. Press the TIMER/SNOOZE button on the Unit.
The volume level set by the previous timer setting blinks on
the display.
2. Press the
¢
or
4
button to select the volume level.
--
: The current volume level will be used.
0 to 50: When the timer is turned on, the Volume will be
automatically set to the selected level.
■
6. Press the TIMER/SNOOZE button on the
Unit.
The timer setting is completed, and the timer indicator remains
lit.
■
7. Before turning off the System, make sure
you have selected a music source in step
4.
TUNER: Tune in to the desired station.
TUNER REC: Tune in to the desired station and load a cassette
tape for recording the station.
CD: Load a CD.
TAPE: Load a tape.
■
8. Press the
%
button to turn off the System.
To cancel the timer,
press the TIMER/SNOOZE button. The
Timer indicator goes out on the display.
To turn on the cancelled timer,
press the TIMER/SNOOZE
button to light the Timer indicator. Then, press the TIMER/
SNOOZE button until the display returns to the original display.
The Timer indicator should remain lit.
To confirm the timer settings,
cancel the timer once by press-
ing the TIMER/SNOOZE button. Then, press the TIMER/
SNOOZE button repeatedly, to see the current timer settings (ON
time, OFF time, source, and volume).
To change the timer setting,
repeat the setting procedure from
the beginning.
•
When the timer turns on, the Timer indicator will blink.
CAUTION: If the System is unplugged, or a power
failure occurs, you will lose the timer setting and
you will have to reset them.
5-Minute Snoozing —————————
When the timer turns on the music on, you can turn it off for 5-
minute.
Press the TIMER/SNOOZE button on the Unit.
The “SNOOZE” indicator lights up on the display and the music
will turn off for five minutes.
(Using the Remote Control)
By setting the Sleep Timer, you can fall asleep to music and know
that your system will turn off by itself rather than play all night.
■
You can only set the Sleep Timer when the System is on and a
source is playing.
■
1. Play a CD, a cassette tape, or tune in to the
desired station.
■
2. Press the SLEEP button on the Remote
Control.
The “SLEEP” indicator lights up.
■
If you have not first set the clock, the “CLOCK” indicator and
the “ADJUST” indicator appear alternately on the display. Set
the clock first.
■
3. Set the length of time you want the System
to play before it turns off.
•
Each time you press the SLEEP button, the timer changes as
follows:
10
=
20
=
30
=
60
=
90
=
120
=
Cancelled
=
(back to
the beginning)
After you set the number of minutes, the display stops blinking and
returns to the normal display. (The display is dimmed.)
The System is now set to turn off after the number of minutes you
set.
To Confirm the Sleep Time,
press the SLEEP button once and
the remaining time will be displayed. In a few moments, the display
will return to normal.
To Cancel the SLEEP Timer Setting,
press the SLEEP button
until the “SLEEP” indicator goes out.
You can also cancel the Sleep Timer by simply turning the System
off.
■
If you are setting the Daily Timer, the System will be turned on
at the set time to wake you up.
Setting the SLEEP Timer
UX-V6V(U)-eng.fm Page 21 Thursday, August 5, 1999 2:59 PM
