JVC UX-V6V Instructions Manual Download

Page: 6 / 30

English

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Using the Supplied Wire Antenna

Rear Panel of the Unit

Using an FM 75-Ohm Antenna Wire (not Supplied) and SW (7-21.85 MHz) Antenna Wire (not Supplied)

If reception is poor, connect the outdoor antenna.

Rear Panel of the Unit

CAUTION: To avoid noise, keep antennas away from the System, the connecting cord and the AC power
cord.

Connecting the FM/SW Antenna

Connecting the AM/SW Antenna

OPTICAL
DIGITAL OUT

AM EXT

FM EXT

LOOP

FM/SW

Ω

Extend the supplied FM/SW
Wire Antenna horizontally.

Strip vinyl shield from cut line,
twist wire core.

FM/SW (7-21.85MHz) Wire Antenna

OPTICAL
DIGITAL OUT

20 mm

10 mm

AM EXT

FM EXT

LOOP

FM/SW

Ω

Outdoor FM antenna wire

Outdoor SW (7-21.85MHz) antenna wire

Note:

Before attaching a 75 ohm coaxial lead (the kind with a
round wire going to an outdoor antenna) or an outdoor SW
antenna, disconnect the supplied FM/SW Wire Antenna.

OPTICAL
DIGITAL OUT

AM EXT

FM EXT

LOOP

FM/SW

Ω

Note:

Even when connecting an outdoor AM an-
tenna, keep the indoor AM/SW loop con-
nected.

Turn the loop until you
have the best reception.

Attach the AM/SW Loop to
its base by snapping the
tabs on the loop into the
slot in the base.

AM/SW (2.3-6.995MHz) Loop Antenna

AM/SW (2.3-6.995MHz) antenna wire (not supplied) if reception is poor,
connect the outdoor antenna.

UX-V6V(U)-eng.fm Page 3 Thursday, August 5, 1999 2:59 PM

Summary of Contents for UX-V6V































Search results

Summary of Contents for UX-V6V

Reviews:

Related manuals for UX-V6V

Brands by name

Popular brands

JVC UX-V6V, Instructions Manual

Search results

Summary of Contents for UX-V6V

Reviews:

Related manuals for UX-V6V

Brands by name

Popular brands