8
English
■
■
Using the Tuner
TAPE
TUNER
CD
CD
OPEN/CLOSE
PHONES
MD/AUX
BAND
STANDBY/ON
DOWN
UP
MULTI CONTROL
RETURN
SELECT
NEXT
PREV
REMOTE CONTROL RM-RXUV6V
DIMMER
SLEEP
DISPLAY
FM MODE
MD/AUX
AHB PRO
AUTO
PRESET
CD
PROGRAM RANDOM
REPEAT
BASS
TREBLE
TREBLE
SELECT
PREV
NEXT
VCD NUMBER
VCD NUMBER
CANCEL
KEY
CONTROL
DIGITAL
ECHO
ON SCREEN
V. INTRO
UP
SET
DOWN
TUNER
BAND
TAPE
VOLUME
CD
<
FM MODE
DOWN
¢
4
AUTO PRESET
UP
>
SET
TUNER BAND
Band display, Frequency display,
Preset channel
FM mode indicators
TUNER BAND
4
¢
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
%
You can easily tune in and listen to FM, AM and SW stations. You
can tune stations in manually, automatically, or from preset memory
storage.
■
Before listening to the radio:
•
Make sure that FM, AM and SW antennas are correctly con-
nected. (See page 3.)
To Set AM Tuner Interval
Spacing ——————————————
When shipped, the AM tuner interval is set to 9 kHz spacing. You
can change it to 10 kHz spacing.
To select 10 kHz intervals,
while holding down the
¢
button
on the Unit in Standby mode, press the
%
button on the Unit to turn
on the power (at the same time, the 100 kHz spacing is selected for
FM broadcast).
To select 9 kHz intervals again,
while holding down the
4
button on the Unit in Standby mode, press the
%
button on the Unit
to turn on the power (at the same time, the 50kHz spacing is selected
for FM broadcast).
[10 kHz Intervals]
[9 kHz Intervals]
Note:
When you change the setting, the preset stations are erased.
You will need to preset the stations again. (See page 9.)
•
However, SW preset stations are stored.
One Touch Radio —————————
Just press the TUNER BAND button to turn on the System and start
playing the station you were last tuned to.
■
You can switch from any other sound source to the radio by
pressing the TUNER BAND button.
■
1. Press the TUNER BAND button.
The Band and Frequency you were last tuned to appear on the
display.
(If the last station was selected using the preset number, the pre-
set number appears first.)
Each time you press the button, the band changes as shown be-
low.
■
2. Select a station using one of the following
methods.
■
Manual Tuning
Press the
4
or
¢
button on the Unit or the Remote Control
repeatedly to move from frequency to frequency until you find
the station you want.
OR
■
Auto Tuning
If you press and hold the
4
or
¢
button on the Unit or the
Remote Control for one second or more, the frequency changes
automatically until a station is found.
OR
■
Preset Tuning using the Remote Control (Possible
only after presetting stations)
Select the desired preset number using the UP, DOWN, > and <
button on the Remote Control. After 1 second the display will
show the preset number’s band and frequency.
Example: Press the UP button until the preset number 12 “P12”
appears.
UP
STANDBY/ON
STANDBY/ON
DOWN
Tuning In a Station
TUNER
BAND
TUNER
BAND
(on the Remote Control)
(on the Unit)
FM
AM
SW
or
DOWN
UP
(After 1 second)
UX-V6V(U)-eng.fm Page 8 Thursday, August 5, 1999 2:59 PM
