JVC TH-A10 Instructions Manual Download Page 8

Page: 8 / 68

Connections

Connecting the FM and AM antennas

FM antenna connections

———————————

A. Using the supplied FM antenna

The FM antenna provided can be connected to the FM 75

Ω

COAXIAL terminal as temporary measure.

B. Using the standard type connector (Not supplied)

A standard type connector should be connected to the FM 75

Ω

COAXIAL terminal.

Note:

• If reception is poor, connect the outdoor antenna.

Before attaching the 75

Ω

coaxial cable (the kind with a round

wire going to an outdoor antenna), disconnect the supplied FM
antenna.

AM antenna connections ———————————

Turn the loop until you have the best reception.

Notes:

• Make sure the antenna conductors do not touch any other

terminals, connecting cords and power cord. This could cause
poor reception.

• If reception is poor, connect an outdoor single vinyl-covered wire

to the AM EXT terminal. (Keep the AM loop antenna connected.)

To connect the powered sub-woofer

Use the supplied system cable to connect the powered sub-woofer
(SP-PWA10).

Center unit (XV-THA10)

Powered sub woofer (SP-PWA10)

Connecting the TV

Connect the TV to view video images from the center unit.

Note:

• When connecting the TV to the TV SOUND/DBS jacks, DO NOT

connect the TV’S-video output to these video input terminals.

Center unit (XV-THA10)

S-video cable (not supplied)

Connect to the TV if it has an S-video input
(for higher image quality). Connect the cables
with the

mark facing down.

System
cable
(supplied)

Video cable
(supplied)

To composite
video input

To S-video
input

Ensure that the

mark on the plug
faces to the right.

Ensure that the

mark on

the plug faces
upwards.

CAUTION:
• Use the system cable provided for attaching the center unit and

the sub woofer.

TH-A10[J]1/1

00.2.24, 14:47

Downloaded From TheatreSystem-Manual.com Manuals

Summary of Contents for TH-A10





































































Search results

Summary of Contents for TH-A10

Reviews:

Related manuals for TH-A10

Brands by name

Popular brands

JVC TH-A10, Instructions Manual

Search results

Summary of Contents for TH-A10

Reviews:

Related manuals for TH-A10

Brands by name

Popular brands