40
Changing the DECODE MODE
(See page 18)
This option is used to change the digital audio decode mode.
The default setting of [AUTO/PCM] is recommended for regular
use.
When the playback source is DVD, you may select a DECODE
MODE.
1.
Open the MAIN MENU
See page 39, “Opening the MAIN MENU”.
2.
Move the pointer to DECODE MODE using the
5
/
∞
cursors.
3.
Use the
2
/
3
cursors to set the decode mode.
The following decoding options are available: AUTO/PCM,
DOLBY DIGITAL, or DTS.
• See page 18 for details of each in decode mode.
Note:
• Only audio for discs for the selected decode mode may be played
when a decode mode other than “AUTO/PCM” is selected.
When the decode mode is changed and a disk has been played
back, return the decode mode to “AUTO/PCM”.
Changing the DSP MODE
(See page 20)
1.
Open the MAIN MENU.
See page 39, “Opening the MAIN MENU”.
2.
Move the pointer to DSP MODE using the
5
/
∞
cursors.
3.
Use the
2
/
3
cursors to set the DSP mode.
When the source is DVD:
You may choose between
“SURROUND”
j
“OFF”
When the source is not DVD or TUNER*:
You may choose between
j
SURROUND
j
THEATER
j
LIVE CLUB
j
DANCE CLUB
j
HALL
j
PAVILION
j
OFF
j
(back to the beginning)
* When the source is set to tuner, the MAIN MENU will not
be displayed.
Adjusting the volume
(See page 16)
1.
Open the MAIN MENU.
See page 39, “Opening the MAIN MENU”.
2.
Move the pointer to VOLUME using the
5
/
∞
cursors.
3.
Use the
2
/
3
cursors to adjust the volume level.
Press
3
to increase the volume.
Press
2
to decrease the volume.
MAIN MENU Settings
TH-A10[J]5/1
00.2.24, 14:55
40
Downloaded From TheatreSystem-Manual.com Manuals
