manualshive.com logo in svg

JVC MP-XP5230, Instructions Manual, Page: 83 / 126

Share
Download
JVC MP-XP5230 Instructions Manual Download Page 83

EN 

83

System Recovery Procedure

1. Hold down the  Alt  and  F8  keys and press the Power button to start up your PC.

When message "Do you wish to continue? (Y/N)" appears, respond with Y.

Tips

• If you respond with N, the recovery is canceled.  The PC will restart and the Windows OS

will start up.

• If too much time is taken to press the key or a continuous beep is heard for other reasons,

turn off the power, and repeat the process.

• If Windows starts up after a delay, exit Windows, turn off the power, and repeat the process.

2. Read the License Agreement when displayed.

If you accept the Agreement, type Y.

Tips

If you respond with N, the recovery is canceled.  The PC will restart and the Windows OS
will start up.

3. Select the recovery method (disk partitioning).

When message "Select the recovery method (A (Recommended)/C)" appears, respond with
the 

1

 or 

2 

key as follows.

1

If you respond with A:

All disk partitions and files of the hard disk are recovered, and the entire PC system is
initialized to its original state.

2

If you respond with C:

The files of drive C are recovered and initialized.
(Usually, all data of drive D remains unaltered, as they are, and only the data of drive C
is initialized.  If drive D has already been removed, the PC only has drive C.)

4. The system recovery starts, and its progress is shown on the screen.

XP72305230E-82-104

2/26/3, 8:57 AM

83

Summary of Contents for MP-XP5230































































































































Reviews:

No comments