manualshive.com logo in svg

JVC MP-XP5230, Instructions Manual, Page: 1 / 126

Share
Download
JVC MP-XP5230 Instructions Manual Download Page 1

LET0235-002A

INSTRUCTIONS

Before Use 
Read and follow the instructions of this manual to use your Mobile 
mini note PC correctly.  
Always read the "Safety Precautions" and "Operation Notes."  Keep 
this manual and the warranty card for further reference. 

Thank you for purchasing the JVC MP-XP7230GB/MP-XP5230GB
Mobile mini note PC. 

    2003 VICTOR COMPANY OF JAPAN, LIMITED

MP-XP7230GB/MP-XP5230GB

Printed in Taiwan
0802HNY

*

IDASS

VICTOR COMPANY OF JAPAN, LIMITED

Mobile mini note PC

·

This equipment with RLAN is intended to be used in Germany, UK, 
Austria and Switzerland.
Outdoor use may be restricted to certain frequencies and/or may
require a licence for operation.

·

The built-in V.90 modem is installed for use on official analog 
telephone lines in Germany, UK, Austria, France and Switzerland. 

·

Packed together with the MP-XP7230GB
are a USB Port Replicator 
(MP-PRX1GB) and a CD-ROM drive 
(MP-CDX1E).

·

Packed together with the MP-XP5230GB 
is a CD-ROM drive (MP-CDX1E).

(The operating instructions guide is
provided with each item packed.)

0197

Summary of Contents for MP-XP5230































































































































Reviews:

No comments