JVC MP-XP5230 Instructions Manual Download Page 101

Page: 101 / 126

101

Trademark notice

1. i.LINK refers to IEEE1394-1995 and their expanded specifications. i.LINK and the

i.LINK logo are trademarks of Sony Corporation, devised to make people more
familiar with IEEE 1394.

2. Microsoft, Windows, Windows Media are trademarks or registered trademarks of

Microsoft Corporation in the U.S. and other countries. The official name for
Windows is Microsoft Windows Operating System.

3. RealPlayer is a registered trademark or pending trademark of RealNetworks, Inc.

in the U.S. and other countries.

4. Adobe, the Adobe logo, and Adobe Acrobat are trademarks of Adobe Systems

Incorporated.

5. Symantec, the Symantec logo, and product names are trademarks or registered

trademarks of Symantec Corporation in the U.S. and other countries.

6. Symantec, the Symantec logo, and Norton AntiVirus are registered trademarks of

Symantec Corporation in the U.S.

7. The SD logo is a registered trademark.
8. CC Converter and the CC Converter logo are trademarks.
9. The Pinnacle System Inc. logo and product names are registered trademarks of

Pinnacle System Inc. in the U.S.

10. Other system, product, and service names may be trademarks or registered

trademarks of respective developers.

XP72305230E-82-104

2/26/3, 8:57 AM

101

Summary of Contents for MP-XP5230































































































































Search results

Summary of Contents for MP-XP5230

Reviews:

JVC MP-XP5230, Instructions Manual, Page: 101 / 126

Search results

Summary of Contents for MP-XP5230

Reviews: