JVC MP-XP5230 Instructions Manual Download Page 6

Page: 6 / 126

• Mobile mini note PC

• MP-ACX1E AC power adapter

(including dedicated AC cable)

• Two Application CD-ROMs

• Instruction manual (this book)

Lithium ion battery pack
• BN-LL21E Large-capacity

(only MP-XP7230GB)

• BN-LS12E standard

(only MP-XP5230GB)

•Warranty card

CHECKING INVENTORY

Before using your Mobile mini note PC (hereinafter Mobile PC), make sure that all of the
following system components have been included in the container.
If you have found any shortage or problem, contact the sales shop.

The illustrations provided in these instructions may differ in part from the actual products.

• Modem cable (1.8-meters long)

• Two stick caps

• Protection cover (of battery terminal)

• Start Here manual

• Telephone adapter

• External display

(MP-VGX1E) cable

(standard)

XP72305230E_02_22

2/25/3, 6:23 PM

Summary of Contents for MP-XP5230































































































































Search results

Summary of Contents for MP-XP5230

Reviews:

JVC MP-XP5230, Instructions Manual, Page: 6 / 126

Search results

Summary of Contents for MP-XP5230

Reviews: