manualshive.com logo in svg

JVC MP-XP5230, Instructions Manual, Page: 60 / 126

Share
Download
JVC MP-XP5230 Instructions Manual Download Page 60

60

 EN

Using the SD Memory Card Slot

Your PC has an SD memory card slot.
An SD memory card or multimedia card can be used.
When you use an SD memory card, remove the dummy card from the SD memory card slot.

1. Remove the dummy card.

2. Insert an SD memory card.

Caution: Insert the SD card in the correct direction.

Notes

• The SD memory card and multimedia card are optional.

• The SD memory card slot of your PC does not support the SD I/O function and data

transfer using the copyright protection functions.

• If you do not use an SD memory card on your PC, keep the dummy card inserted in the

slot to prevent dust or other foreign bodies getting into the PC.

• When formatting an SD memory card or MultiMedia card in this PC’s SD memory card

slot for use in a DVC or digital camera, first select [FAT] rather than [FAT32] on the Windows
XP format screen, and then proceed with the formatting.

* Before formatting a memory card, back up its contents on the PC’s hard disk drive, for

instance.

1

  Press the dummy card slightly, and it will be ejected.

2 

Hold the ejected card and remove it from your PC.

1

2

Check the cut area.
(The terminal side
must face downward.)

HARDWARE

XP72305230E_52_65

2/21/3, 7:12 PM

60

Summary of Contents for MP-XP5230































































































































Reviews:

No comments