– 59 –
3
Press
or
to change the title entry mode.
• Each time you press the button, the title entry mode
changes as follows:
For the disc and track title:
For the group title:
4
Press SET to enter the unit into the selected title
entry mode.
5
Enter characters.
1) Press DISP/CHARA to select the character set
you want.
• Each time you press the button, the character set
changes as follows:
2) Press the character entry button for a character
you want to input.
Ex.:
• To enter an “A” or “a,” press ABC once.
To enter a “B” or “b,” press ABC twice.
To enter a “C” or “c,” press ABC three times.
• To enter a symbol, press MARK repeatedly until
the mark you want appears.
• To enter a numeral, press 0 – 9.
• To enter a space while entering a title, press
twice.
• To move the character entry position while
entering a title, press
or
*.
• If you have entered an incorrect character, press
or
to select the character you want to
correct, then press CANCEL to delete it.
* If you press
repeatedly during recording, the
entered characters may be displayed incorrectly. In this
case, press TITLE/EDIT or GROUP TITLE/EDIT, then
repeat from step
2
again.
Assigning Titles to an MD
You can assign a name to each MD, to each group and to
each track using alphabetic characters (uppercase and
lowercase), symbols and numerals. Once a title is assigned,
it is displayed for your confirmation.
• You cannot edit titles composed of more than 64
characters.
About the number of characters entered for an MD
The total number of characters that you can enter for an MD is
1792. The maximum number that you can enter for a disc title
is 64, and for each track title, 61. (However, the actual number
you can enter may be slightly less than these maximum
numbers due to the MD limitations—see page 68.)
• A space can be counted as one character.
• When the stereo long-hour recording (LP2 or LP4, see page
38) method is used for recording, the maximum number you
can enter for a track title is automatically reduced since
“LP:” and a space are automatically added to the beginning
of the track title. Consequently this reduces the total number
of characters you can enter for an MD.
Ex.: You can enter up to 10 characters for each track if an
MD is composed of 120 tracks recorded using the
stereo long-hour recording method.
In the following example, the process is explained from the
very first—that is, inserting a disc. If you have already
started recording or playing, start from step
2
.
• You can edit titles during playback (in Normal play
mode).
• To exit from the title entry screen any time during the
process, press TITLE/EDIT or GROUP TITLE/EDIT
repeatedly.
1
Insert an MD you want to edit into the MD loading
slot.
2
Enter the unit into the title entry mode.
For the disc and track title:
Press TITLE/EDIT.
Disc title entry screen appears in the main display.
For the group title:
Press GROUP TITLE/EDIT.
Group title entry screen appears in the main display.
Capital letters &
Symbols
Small letters &
Symbols
Numerals
DISC TITLE?
1 TITLE?
2 TITLE?
3 TITLE?
The last
track title
GR– – TITLE?
GR1 TITLE?
GR2 TITLE?
The last
group title
Ex.: When the disc has no title.
Character entry position
Character set
EN59-60UX-Z7MDR[B]f
02.6.28, 13:52
59