– 23 –
Precautions on CD Playback
This unit has been designed to play back discs bearing the
following logos:
In addition to the above discs, this unit can play back audio
data recorded on CD Text, CD-G (CD Graphics), and
CD-Extra.
When playing a CD-R or CD-RW
User-edited CD-Rs (CD-Recordable) and CD-RWs
(CD-ReWritable) can be played back when they are already
“
finalized
.” If you try to play back
unfinalized
discs, “CD
NO DISC” may appear in the main display.
• You can play back your original CD-Rs or CD-RWs
recorded in
audio CD format ONLY
.
(If CD-RWs have
been recorded in different format, erase all the data on
CD-RWs completely before re-recording on the discs.)
DO NOT play back CD-Rs or CD-RWs recorded
with sound files such as MP3.
• Before playing back CD-Rs or CD-RWs, read their
instructions or cautions carefully.
• Some CD-Rs or CD-RWs may not be played back on
this unit because of their disc characteristics, damage or
stain on them, or if the player’s lens is dirty.
Important notices:
• In general, you will have the best performance by
keeping your discs and the mechanism clean.
– Store discs in their cases, and keep them in cabinets or
on shelves.
– Keep the unit’s disc tray closed when not in use.
• Continuous use of irregular shaped discs (heart-shape,
octagonal, etc.) can damage the disc rotating mechanism.
• CD-RWs may require a longer readout time since the
reflectance of CD-RWs is lower than for regular CDs.
Playing Back the Entire CD—Normal Play
1
Press CD
0
on the main unit.
The unit automatically turns on, the electronic swing
panel slides downward, then the disc tray comes out.
2
Place a disc correctly on the circle of the disc tray
with its label side up.
• When using a CD single (8 cm), place it on the
inner circle of the disc tray.
3
Press CD
3
/
8
.
The disc tray closes, then the electronic swing panel
slides upward automatically.
The CD indicator starts flashing on the display and disc
playback starts from the first track of the disc.
• If you press CD
0
instead of CD
3
/
8
, the disc
tray and electronic swing panel close, but disc
playback does not start.
Disc playback stops after playing all the tracks of the
disc.
To stop during play,
press
7
.
To remove the disc,
press CD
0
.
• After removing the disc, press CD
0
again to close the
disc tray.
Good
No good
Audio CD
CD Recordable (CD-R)
CD ReWritable (CD-RW)
Disc tray
Electronic swing
panel
CD (disc) indicator
Elapsed playing time
The current track No.
EN22-25UX-Z7MDR[B]f
02.6.28, 13:47
23
