65
English
Entering the Disc Information
For the CD Player with the disc memory function:
You can use the disc memory function through this receiver.
The disc information (its performer, disc title, and its music genre) of normal audio CDs
will be stored into the memory built in the CD player.
For the disc memory function, refer to the manual supplied with your CD player.
•
The performer, disc title, and music genre information are usually recorded in a CD
Text. However, if a CD Text has no genre information recorded in the disc itself, you
can input its music genre by yourself.
Note: You can enter the TITLE INPUT screens for a CD Text and input its titles.
However,
you cannot store the titles you have input for a CD Text.
Example: Entering the following information for Disc 1
Performer: “MICHEAL”
Disc title: “MY FAVORITE”
1. Display the disc information screen by following the procedure on page 61.
2. Press ON SCREEN CONTROL
%
/
fi
to move
to “TITLE INPUT,” then
press SET.
The TITLE INPUT: PERFORMER screen appears on the TV.
3. Press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to move
in front of a
character you want, then press SET to enter the character.
•
If the current CD is a CD Text, go to step 5 without entering the performer.
To use the lower case letters, press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to
move
to SHIFT , then press SET.
To use the upper case letters again, press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to move
to SHIFT , then press SET.
4. Repeat step 3 until you finish putting a name (up to 32 characters) to this
User File.
To insert a space, press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to move
to
SPACE , then press SET.
To correct an incorrect character:
1) Press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to move
to
or
, then
press SET until the incorrect character is selected.
2) Press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to move
to CANCEL, then
press SET to erase the character.
3) Press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to move
in front of an correct
character, then press SET to enter a correct character.
5. Press ON SCREEN CONTROL
%
/
fi
/
@
/
#
to move
to “DISC1:
MICHEAL (in this example),” then press SET.
The TITLE INPUT: DISC TITLE screen appears.
6. Enter the disc title, referring to steps 3 and 4.
•
If the current CD is a CD Text, go to the next step without entering the disc
title.
TEXT COMPU LINK Remote Control System
TITLE INPUT: DISC TITLE
screen
TITLE INPUT: PERFORMER
screen
EN52_78.RX-774R[E]/1
98.3.31, 2:08 PM
65
