34
English
Switching to a Broadcast Program of Your Choice Temporarily
Another convenient RDS service is called “EON (Enhanced Other Network).”
The EON indicator lights up while receiving a station with the EON code.
This allows the receiver to switch temporarily to a broadcast program of your choice
(NEWS, TA, and/or INFO) from a different station except in the following cases:
•
When you are listening to a non-RDS stations (all AM — MW/LW and some FM
stations).
•
When the last received FM station is a non-RDS station.
•
When the receiver is in standby mode.
On the front panel
only:
1. Press EON so that the last selected program type
appears on the display.
The receiver enters EON standby mode*.
2. Press TA/NEWS/INFO until the program type you
want appears on the display.
Each time you press the button, the display changes to
show the following:
TA:
Traffic Announcement in your area.
NEWS:
News.
INFO:
Program the purpose of which is to impart advice in the widest sense.
CASE 1
If there is no station broadcasting the program you have selected
The receiver continues playing the current source (all sources except AM (MW/
LW)).
When a station starts broadcasting the program you have selected, the receiver
automatically switches to the station. The indicator of received PTY code starts
flashing.
When the program is over, the receiver goes back to the previously selected source,
but still remains in EON standby mode. The indicator of received PTY code stops
flashing and remains lit.
Note:
* When the receiver is in EON
standby mode, the receiver is
ready to receive the EON data
(TA/NEWS/INFO) you select.
EON
TA/NEWS/INFO
TA
NEWS/INFO
TA/INFO
NEWS
TA/NEWS/INFO
INFO
TA/NEWS
Continued to the next page.
‘
‘
Note:
FM stations must be preset to
use the EON function.
EN20_51.RX-774R[E]/1
98.3.31, 2:04 PM
34