35
English
Receiving Radio Broadcasts
CASE 2
If there is a station broadcasting the program you have selected
The receiver changes the source (all sources except AM (MW/LW)), and tunes in
the station. The indicator of received PTY code starts flashing.
When the program is over, the receiver goes back to the previously selected source,
but still remains in EON standby mode. The indicator of received PTY code stops
flashing and remains lit.
CASE 3
If the FM station you are listening is broadcasting the program you
have selected
The receiver continues to receive the station but the indicator of received PTY code
starts flashing.
When the program is over, the indicator of received PTY code stops flashing and
remains lit, but the receiver remains in EON standby mode.
To stop listening to the program selected by EON
Press EON so that the program type (TA/NEWS/INFO) goes off from the display. The
receiver enters EON off mode and goes back to the previously selected source.
Each time you press EON, the EON mode alternates between standby mode and off
mode.
‘
‘
Notes:
• EON data sent from some
stations may not be
compatible with this receiver.
• In EON standby mode, if you
change the source to AM
(MW/LW) or if you carry out
synchronized recording (see
page 59), EON standby mode
is canceled temporarily. The
receiver goes back to EON
standby mode again when you
have finished that operation.
• While listening to a program
tuned in by the EON function,
you can only use STANDBY/
ON
, EON, MASTER
VOLUME (on the front panel)
and AUDIO
(on the
remote control).
• While listening to a program
tuned in by the EON function,
you cannot perform the on-
screen operations (pages 52
and 61).
• When the receiver is turned off
(into standby mode), the EON
function is also turned off.
CAUTION:
When the source alternates
intermittently between the
station tuned in by the EON
function and the currently
selected source, press EON to
cancel the EON function. This is
not a malfunction of the receiver.
EN20_51.RX-774R[E]/1
98.4.9, 2:48 PM
35
