43
English
Using the DSP Modes
From the remote control:
1. Press SURROUND MODE repeatedly until the mode
you want appears on the display.
The DSP indicator also lights up on the display.
Each time you press the button, the DSP modes change
as follows (the indicator of the selected DSP mode also
lights up on the display):
If you need to make any adjustment, go to the following steps.
2. Press SOUND CONTROL.
10 keys are activated for sound adjustments.
3. Press REAR•(L) +/– to adjust the rear speaker
output level.
• Pressing REAR•(L) – decreases the output level up to
–10 dB.
• Pressing REAR•(L) + increases the output level up to
+10 dB.
4. Press EFFECT to select the effect level.
Each time you press the button, the effect level changes
as follows:
As the number increases, the selected DAP mode
becomes stronger.
To cancel the DAP mode
Press SURROUND MODE repeatedly until “OFF” appears.
The DSP indicator goes off from the display.
Notes:
• When you select “DVD MULTI”
as the source to play, you
cannot select the DAP modes.
• The DAP mode is not used
with the other DSP modes
such as the Dolby Pro Logic
and 3D-PHONIC mode. When
the DAP mode is turned on,
the other DSP mode, if used,
will be turned off.
SURROUND
MODE
HALL
DANCE CLUB
LIVE CLUB
THEATER
3D ACTION
HEADPHONE
PRO LOGIC
3D DRAMA
PAVILION
3D THEATER
OFF
SOUND
CONTROL
REAR (L)
5
6
ENTER
Note:
When you select
“HEADPHONE” (the
HEADPHONE indicator lights
up), you cannot go to the
following steps. No adjustments
can be made for
“HEADPHONE.”
Notes:
• You cannot adjust the left and
right rear speaker output level
separately.
• You cannot adjust the rear
speaker level when “REAR
SPK” is set to “NO” (see page
25).
7
/P
EFFECT
DSP EFFECT 1
DSP EFFECT 2
DSP EFFECT 4
DSP EFFECT 3
DSP EFFECT 5
Note:
Once you have adjusted the
DAP modes, the adjustment is
memorized for each DAP mode.
EN20_51.RX-774R[E]/1
98.3.31, 2:05 PM
43
