JVC KW-M875BW, Instruction Manual

Page: 73 / 98

Controlling Audio
73
English
■ [
Location
]
(Only for Front, Rear)
Select the speaker position you have
installed.
■ [
Tweeter
]
(Only for Front)
You can set up the tweeter when you are
selecting front speakers.
None, Small, Medium, Large
■ [
X
ʼ
over
]
Display the speaker crossover setup screen.
You can adjust the crossover frequency that
was set automatically when you selected the
speaker type.
For details, see
Crossover network setup
(P.73) .
When Speaker network is set to 3-way:
1
2
NOTE
• For how to switch to the 3-way speaker system,
see 3-way speaker system setup (P.71) .
Connecting 3-way speakers with the 2-way mode
selected can break the speakers.
• Select “None” if you have no speakers.
Ñ
Crossover network setup
You can set the crossover frequency of
speakers.
1
Touch
[
X
ʼ
over
]
.
2
Touch the speaker to set up.
3
Set each parameter as follows.
■ [
HPF FREQ
]
High Pass Filter adjustment. (When Front or
Rear is selected on the Speaker Select screen)
■ [
LPF FREQ
]
Low Pass Filter adjustment. (When
Subwoofer is selected on the Speaker Select
screen)
■ [
Slope
]
*
1
Set a crossover slope.
■
[
Gain
]
Adjust the gain of the front speaker, rear
speaker, or subwoofer.
■ [
TW Gain
]
*
2
Adjust the tweeter level. (When Front is
selected on the Speaker Select screen)
■ [
Phase Inversion
]
* 3
Set the phase of subwoofer output.
Check
[
Phase Inversion
]
to shift the phase
180 degrees. (When Subwoofer is selected
on the Speaker Select screen)
* 1 Only when “LPF FREQ”/“HPF FREQ” is set to
a mode other than “Through” in
[
X
ʼ
over
]
.
*
2
Only when “Tweeter” is set to “Small”,
“Medium”, “Large” in
[
Speaker Setup
]
.
*
3
Only when “Subwoofer” is set to a mode
other than “None” in
[
Speaker Setup
]
.