JVC KM-H2500, Manual

Page: 43 / 68

37
8. Press NEXT until RState Save is displayed.
9. Press the RState Save knob to save the new
default settings.
10. Press the Confrm knob to commit the save.
Press the Cancel knob to cancel the save and
return to the previous setting.
Restoring Default Settings to Factory State
You can restore user-defined default settings to a
factory state. This is useful if you wish to begin
creating a new user-defined default from a known
starting configuration.
To restore user-defined default settings to the
factory state:
1. Press MENU .
2. Press the RESET Wipe Pattern button.
3. Press NEXT .
4. Press the Dfault RState knob to restore the
user-defined defaults to factory settings.
5. Press the Confrm knob to commit the change.
Press the Cancel knob to cancel the change and
return to the previous setting.
Resetting the Switcher
Resetting the switcher restores the user-defined
default settings.
To reset the switcher:
1. Press and hold MENU .
2. Press the RESET Wipe Pattern button.
To reset the switcher using an alternate method:
1. Press MENU .
2. Press the RESET Wipe Pattern button.
3. Press the RState Load knob.
All switcher settings are restored to the
user-defined default values.
Shared Parameters
Some parameters are shared between features and if
reset in one area, are reset in all areas that share that
parameter. The shared parameters are:
• Time — This value is shared between dissolves,
wipes, and DVE transitions.
• Limit — This value is shared between dissolves,
wipes, and DVE transitions.
• Pattern ( Pattrn ) — This value is shared between
wipes and mattes.
Resetting Individual Settings
You can reset individual settings to user-defined
default values rather than resetting the entire
switcher.
To reset wipes:
1. Press and hold down WIPE .
2. Press the RESET Wipe Pattern button.
To reset dissolves:
1. Press and hold down DISS .
2. Press the RESET Wipe Pattern button.
To reset Key 1:
1. Press and hold down CHR KEY , AUTO SELECT ,
or DVE .
2. Press the RESET Wipe Pattern button.
Note:
• The selected Chroma Key color and any Split Key
assignments are not reset.
To reset Key 2 or 3:
1. Press and hold down KEY 2 SEL (or KEY 3 SEL
on the KM-H 3000).
2. Press the RESET Wipe Pattern button.
When resetting a key, the selected Chroma Key
color and any Split Key assignments are not
reset.
Note:
• The selected Chroma Key color and any Split Key
assignments are not reset.
To reset Aux buses:
1. Press and hold down AUX SEL (KM-H 2500) or
AUX 1 or AUX 2 or AUX 3 (KM-H 3000).
2. Press the RESET Wipe Pattern button.
4
2 3
1
2
1