manualshive.com logo in svg

JVC KM-H2500, Manual

Share
Download
JVC KM-H2500 Manual Download Page 22

16

To set the Aux Bus Recall Mode:

1.

Press 

RECALL

.

2.

Press 

NEXT

 until 

AuxMem

 is displayed.

3.

Press the 

AuxMem

 knob to set the Aux Bus 

Recall Mode. You can choose from the following:

•

NoRcll

 — Aux buses ignore the input saved 

with the recalled memory and retain the 
current input.

•

Recall

 — Aux bus inputs change to the input 

saved with the recalled memory.

For More Information on...

• saving and recalling switcher settings, refer to the 

section “Using the Memory System” on page 33.

Customizing the Panel Glow

Panel buttons are set to a glow color which is used 
when the button is not selected. This glow color can 
be customized.

To customize the Panel Glow color:

1.

Press 

MENU

.

2.

Press the 

USER

 Wipe Pattern button.

3.

Press the 

Scheme

 knob to display the 

Color 

Scheme

 menu.

4.

Use the 

HUE

 knob to adjust the Panel Glow hue.

5.

Use the 

SAT

 knob to adjust the Panel Glow 

saturation.

6.

Use the 

LUM

 knob to adjust the Panel Glow 

luminance.

Note:

• It is not recommended to set the Panel Glow color 

to red. Red indicates a source is on-air.

For More Information on...

• hue, saturation, and luminance, refer to the section 

“Selecting Colors” on page 4.

Saving Color Schemes

You can save a custom Panel Glow color scheme so 
that it may be recalled as needed. 

To save a custom Panel Glow color scheme:

1.

Modify the Panel Glow to obtain the desired 
appearance.

2.

Press 

MENU

.

3.

Press the 

USER

 Wipe Pattern button.

4.

Press the 

Scheme

 knob to display the 

Color 

Scheme

 menu.

5.

Press 

NEXT

 until 

Save

 is displayed.

6.

Use the 

Save

 knob to select the custom scheme 

you wish to save.

7.

Press the 

Save

 knob to save the color scheme.

8.

Press the 

Confrm 

knob to commit the save (if 

there was a color scheme saved to the selected 
custom scheme, it is overwritten). Press the 

Cancel

 knob to cancel the save.

Loading Color Schemes

You can load a custom color scheme or one of the 
preset color schemes that are included on your 
switcher. 

To load a custom Panel Glow color scheme:

1.

Press 

MENU

.

2.

Press the 

USER

 Wipe Pattern button.

3.

Press the 

Scheme

 knob to display the 

Color 

Scheme

 menu.

3

2

1

4

5

6

2

1

6

4

3

5

2

5

3

2

4

1

Summary of Contents for KM-H2500





































































Reviews:

No comments

Brands by name

Popular brands

Load more brands