basic features
34
Return to Normal Screen
Press
MENU
twice.
Engage Timer Mode
You must now put the VCR into Timer Mode by pressing
o
otherwise no
recording will take place. The timer indicator and standby/record indicator light
on the display panel. To disengage the Timer Mode, press
o
again.
• If a cassette has not loaded when the VCR enters the Timer Mode, the timer
indicator blinks on the display panel.
Intelligent LP Recording
When you set the tape speed to
IP
, the VCR automatically switches to LP mode
to allow complete recording if there is not enough tape to record the entire
programme while timer-recording in SP mode.
For example
, recording a programme of 210 minutes in length onto a 180-
minute tape.
Approximately 150 minutes
Approximately 60 minutes
SP mode
LP mode
Total 210 minutes
NOTES:
• If you have programmed the VCR to timer-record 2 or more programmes, do
not use this function, but change the tape speed manually during timer
programming.
• There may be some noise and sound disturbance where the tape speed
switches from SP to LP mode on the tape.
• This function is not available during ITR (Instant Timer Recording), and will
not work properly with any tapes longer than E-180 or with some tapes of
shorter lengths.
HR-V505EK-EN/p31-36
2/12/03, 6:34 PM
34
Summary of Contents for HR-V505EK
