plug&play setup
11
Check the Results
Make sure that all necessary stations have been stored in the VCR’s memory by
using the
^
and
&
buttons.
If station names (ID —
墌
pg. 21) have also been stored in the VCR’s memory, the
station name will be displayed on the TV screen.
Finish Off
return to normal screen
Press
MENU
.
The Tuner Set is completed.
IMPORTANT
•
re-running setup
Plug&Play Setup may not behave as described if it has
already been run on the VCR. This is because some of the information gathered
on the first Plug&Play Setup is retained in memory and that part of the process
may be skipped by the VCR.
•
duplic ate stations
You may be able to receive the same station from two
different transmitters in which case Plug&Play Setup will detect and store both.
It is normal for one transmitter to give you a better quality picture than the
other; to delete those stations which have a poor picture
墌
Delete A Channel
on
page 19.
•
manual station setting
If any of the above problems occur, refer to
page 19 to input station names (
墌
Change Station Name
). You can also change
station preset positions (
墌
pg. 20,
Change Station Preset Position
).
IF YOU HAVE ANY DIFFICULTY WITH THE ABOVE PROCEDURES CALL THE JVC
CUSTOMER SERVICE HOT LINE ON 0870 330 5000
HR-V505EK-EN/p08-12
2/12/03, 6:32 PM
11
Summary of Contents for HR-V505EK
